The HBT CST45 gearbox is suitable for use as conveyor gearbox installed on drive frames and fitted to their input shafts. There are two designs available for most CST drive systems: an in-line gearbox design (the P gearboxes) and an angular gearbox design (the KP gearboxes).
Maximum Output Torque
450 000 Nm (331,858 lb/ft)
Max. Input Speed
1,800 rpm
Rated Power P
up to 800 kW (1,305 hp)
A CST gearbox comes in three parts: a supply unit, a first planetary gear stage and an output unit comprising a second planetary gear stage. The KP gearbox also comes in three parts. The supply unit and output unit are the same as the ones from the P gearbox, but the first planetary gear stage is replaced by a bevel helical gearbox unit. The KP gearbox design is available in a left-handed and in a right-handed version. It is also possible to mount the electro-hydraulic controller either inside or outside the supply unit.
The roller bearings of the bevel gear shaft are lubricated by forced lubrication via the built-in oil pump (usually responsible for cooling oil supply to the CST clutch). All other gearings and roller bearings are lubricated by means of splash lubrication.
Reduction ratios of 24,4:1, 28:1, 33:1, 39:1, and 45:1 are available, others are possible on request. Depending on the ratio, the permissible input power of the gearbox can be up to 800 kW/1,088 hp at a mains frequency of 50 Hz (≈ 1,485 rpm) or 960 kW/1,305 hp at a mains frequency of 60 Hz ( ≈ 1,782 rpm). The permissible output torque is 450,000 Nm (max for 3 seconds). The rated continuous output torque is 175,000 (i=39).
Maximum Output Torque (for 3 sec) | ||
| KP-45/P-45 CST | 450 000 Nm | (331,858 lb/ft |
| Rated Power P Ratio i[-] | Rated Power P (n = 1,485 rpm) | Rated Power P (n = 1,782 rpm) |
| 24.5 | 800 kW | 1,305 hp |
| 28 | 800 kW | 1,305 hp |
| 33 | 800 kW | 1,305 hp |
| 39 | 700 kW | 1,142 hp |
| 45 | 540 kW | 881 hp |
| 50 | 500 kW | 816 hp |
Dimensions | ||
| KP-45 CST Length Width Height | 2875 mm 1401 mm 1060 mm | 113.2 in 55.2 in 41.7 in |
| P-45 CST Length Width Height | 1697 mm 1120 mm 1060 mm | 66.8 in 44.1 in 41.7 in |
Capacity | ||
| KP-45 CST Oil Quantity Gearbox Weight (without oil) | 730 L 9700 kg | 193 gal 21,385 lb |
| P-45 CST Oil Quantity Gearbox Weight (without oil) | 430 L 5900 kg | 114 gal 13,007 lb |
Requirements of Cooling Water | ||
| Required Cooling Water | 25 L/min | 6.60 gal/min |
| Maximum Water Inlet Temperature | 25° C/298.15 K | 77° F/298.15 K |
Shaft Design | ||
| Input Shaft (cylindrical) | DIN 5480-W 120×4 | DIN 5480-W 120×4 |
| Output Shaft with Internal Toothing | DIN 5480-N 260×10×30×24 | DIN 5480-N 260×10×30×24 |
You need further product information or like to request a quote?
Just contact us.
HBT GmbH
Industriestrasse 1
44534 Luenen
Germany
Telefon: +49 2306 747-1100
E-Mail: info@hbt-group.com
